Problem starting GDP morty on the minnowboard
changhyeok.bae at gmail.com
Wed Apr 19 12:50:06 EDT 2017
>From morty, we are using kernel v4.6 or newer kernel and you need to change
"TARGET_DEVICE" from /dev/mmcblk0 to /dev/mmcblk2 when you create image.
Please see https://wiki.minnowboard.org/Yocto_Project
2017-04-19 21:39 GMT+09:00 Sjolind, Viktor (Pelagicore) <
viktor.sjolind at pelagicore.com>:
> I am trying to verify that the supported targets for GDP work with morty.
> Currently I am testing out the Minnowboard which builds fine but does not
> start when run on the target.
> It gets through the booting but then hangs on waiting for
> "/dev/mmcblkp02", that is waiting for the rootfs. I made sure that the
> partition exists and seem to contain everything it should. Furthermore, I
> made sure that everything is properly written to the SD card using sync and
> unmount where applicable.
> Has anyone seen this before or know anything about why this occur?
> genivi-projects mailing list
> genivi-projects at lists.genivi.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the genivi-projects