Vehicle Signal Interface API Proposal

Andreas.Warnke at elektrobit.com Andreas.Warnke at elektrobit.com
Fri May 20 05:36:01 EDT 2016


Hello Pavel,
Thanks for forwarding!

Hello All,
What about the W3C Vehicle interface? (Or was this already discussed? https://www.w3.org/2014/automotive/vehicle_spec.html )

cu
Andreas

-----Original Message-----
From: Konopelko, Pavel (P.) [mailto:pkonopel at visteon.com] 
Sent: Thursday, May 19, 2016 2:25 PM
To: hedwin; Andersson, Gunnar (Volvo CC)
Cc: genivi-projects at lists.genivi.org; Warnke, Andreas
Subject: RE: Vehicle Signal Interface API Proposal

Andersson, Gunnar wrote on 2016-05-19:
>> What is the rationale for creating such an new API?
>> 
>> Are there no solutions already available that could be declared as to 
>> be used standard within GENIVI?
> 
> Apparently there are not (or at least none have been found) or I am 
> sure we would happily reuse them.
>
> You may also want to refer to this presentation from the GENIVI AMM [1].
> It doesn't go deeply into the API question but describes some 
> rationale for the proposed implementation.  If that rationale is valid 
> then the implementation needs an API of course.
> 
> Do you know of any alternative suggestion?

There is a similar IPC [2] developed by Andreas Warnke (CCed).  AFAIK, it also implements its own flavor of Common API.
 

Regards,
--Pavel Konopelko
 
> [1]
> https://at.projects.genivi.org/wiki/display/WIK4/14th+GENIVI+AMM?previ
> ew =/11569248/11570928/VSI%20Presentation%20Slides.pdf

[2] http://andreaswarnke.de/ipc-quartztime/html/index.html


> Från: genivi-projects-bounces at lists.genivi.org <genivi-projects- 
> bounces at lists.genivi.org> för hedwin <hedwin.koning at gmail.com>
> Skickat: den 19 maj 2016 13:09:34
> Till: Vick, Matthew
> Kopia: genivi-projects at lists.genivi.org
> Ämne: Re: Vehicle Signal Interface API Proposal
> 
> What is the rationale for creating such an new API?
> 
> Are there no solutions already available that could be declared as to 
> be used standard within GENIVI?
> 
> 
> Hedwin
> 
> 
> 
> On Sat, May 14, 2016 at 12:50 AM, Vick, Matthew 
> <mvick at jaguarlandrover.com> wrote:
> 
> 
> 	All,
> 
> 	I have taken an initial stab at the Vehicle Signal Interface API, 
> available here: https://github.com/GENIVI/vehicle_signal_interface
> 
> 	Any and all feedback is welcome at this point. The API is 
> intentionally as tight as possible right now to proactively fight API 
> bloat, so please feel free to offer quality of life suggestions in 
> addition to any suggestions for the core API.
> 
> 	The API is currently a stub with more functionality coming soon.
> Stay tuned for the VSI core, which will trigger the beginning of the 
> work to integrate the API and the core together.
> 
> 	Pull requests are welcome!
> 
> 	Cheers,
> 	Matthew
> 
> 
> 	--
> 
> 	Matthew Vick
> 
> 	Software Architect
> 
> 
> 	 <http://www.jaguarlandrover.com/email/jlr.jpg>
> 
> 
> 	Jaguar Land Rover North America, LLC
> 
> 	1419 NW 14th Ave, Portland, OR 97209
> 	JaguarUSA.com <http://www.jaguarusa.com/index.html>   |
> LandRoverUSA.com <http://www.landrover.com/us/en/lr/>
> 
> 
> 	_______________________________________________ 	genivi-projects
> mailing list 	genivi-projects at lists.genivi.org
> 	https://lists.genivi.org/mailman/listinfo/genivi-projects
> 
> 
>





More information about the genivi-projects mailing list