Results of my experiments on RCar-Porter today

Roland Krause rkrause at ics.com
Wed Mar 30 20:09:11 EDT 2016


I managed to get it booting but no output from the HDMI touchscreen (tried
the http://www.giantec.com.tw/products/GL116FHD_CTA.htm that i  have used
for the RPi all day)

dmesg output attached

lsmod shows nearly nothing loaded:

 ssh root at 192.168.1.26 lsmod
Password:
Module                  Size  Used by
bc_example              5886  0
pvrsrvkm              448206  1 bc_example

journalctl -u weston
also attached.

I'd be available and willing to either stay up late at night or get up
somewhat early to trouble shoot this if someone  wants to try out a few
different things. My bitbaker is rather fast too.

Is there an image for GDP-7 or 8 that we could try? To make sure there is
nothing fundamentally wrong with the hardware?

Regards
Roland
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genivi.org/pipermail/genivi-projects_lists.genivi.org/attachments/20160330/0b9ca6ca/attachment.html>
-------------- next part --------------
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.31-ltsi (ics at ics-SVDesktop) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Thu Mar 24 18:55:41 PDT 2016
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=30c73c7d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: porter, model: Porter
cma: CMA: reserved 256 MiB at 70000000
cma: CMA: reserved 256 MiB at 57000000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 524288
free_area_init_node: node 0, pgdat c06bcc80, node_mem_map c0f00000
  Normal zone: 1248 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 159744 pages, LIFO batch:31
  HighMem zone: 15136 pages used for memmap
  HighMem zone: 364544 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @c4f1d000 s8064 r8192 d12416 u32768
pcpu-alloc: s8064 r8192 d12416 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523040
Kernel command line: console=ttySC6,38400 vmalloc=384M video=HDMI-A-1:1024x768-32 at 60 root=/dev/mmcblk0p1 rw rootfstype=ext3
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024MB 1024MB = 2048MB total
Memory: 1547824k/1547824k available, 549328k reserved, 1196032K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe7800000 - 0xff000000   ( 376 MB)
    lowmem  : 0xc0000000 - 0xe7000000   ( 624 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc064508c   (6389 kB)
      .init : 0xc0646000 - 0xc0680f80   ( 236 kB)
      .data : 0xc0682000 - 0xc06be560   ( 242 kB)
       .bss : 0xc06be560 - 0xc06f47f4   ( 217 kB)
Preemptible hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:16 nr_irqs:16 16
Architected local timer running at 10.00MHz (virt).
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 10000kHz, resolution 100ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc049b6d8 - 0xc049b730
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (40.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
sh-pfc e6060000.pfc: r8a77910_pfc support registered
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
bio: create slab <bio-0> at 0
gpio_rcar e6050000.gpio: driving 32 GPIOs
gpio_rcar e6051000.gpio: driving 32 GPIOs
gpio_rcar e6052000.gpio: driving 32 GPIOs
gpio_rcar e6053000.gpio: driving 32 GPIOs
gpio_rcar e6054000.gpio: driving 32 GPIOs
gpio_rcar e6055000.gpio: driving 32 GPIOs
gpio_rcar e6055400.gpio: driving 32 GPIOs
gpio_rcar e6055800.gpio: driving 26 GPIOs
SDHI0 Vcc: 3300 mV 
SDHI2 Vcc: 3300 mV 
SDHI0 VccQ: 1800 <--> 3300 mV at 3300 mV 
SDHI2 VccQ: 1800 <--> 3300 mV at 3300 mV 
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-sh_mobile e60b0000.i2c: I2C adapter 6 with bus speed 100000 Hz (L/H=0x1b/0x13)
i2c-rcar e6518000.i2c: probed
i2c-rcar e6530000.i2c: probed
i2c-rcar e6520000.i2c: probed
i2c-rcar e6528000.i2c: probed
media: Linux media interface: v0.10
Linux video capture interface: v2.00
sh_cmt sh_cmt.0: used for clock events
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1199
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
unable to find transceiver
platform pci-rcar-gen2.0: Driver pci-rcar-gen2 requests probe deferral
unable to find transceiver
platform pci-rcar-gen2.1: Driver pci-rcar-gen2 requests probe deferral
rcar-pcie fe000000.pcie: PCIe link down
DA9210: 1000 mV at 4600 mA 
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH (H)SCI(F) driver initialized
sh-sci.6: ttySC6 at MMIO 0xe6e60000 (irq = 184) is a scif
console [ttySC6] enabled
at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
scsi0 : sata_rcar
ata1: SATA max UDMA/133 irq 137
m25p80 spi0.0: s25fl512s (65536 Kbytes)
3 ofpart partitions found on MTD device spi0.0
Creating 3 MTD partitions on "spi0.0":
0x000000000000-0x000000080000 : "loader"
0x000000080000-0x000000600000 : "user"
0x000000600000-0x000004000000 : "flash"
renesas_spi e6b10000.spi: probed
CAN device driver interface
rcar_can e6e80000.can: device registered (reg_base=e78f2000, irq=218)
sh-eth ee700000.ethernet: no valid MAC address supplied, using a random one.
libphy: sh_mii: probed
sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 4a:9d:d8:7d:5e:58, IRQ 194.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c-core: driver [adv7612] using legacy suspend method
i2c-core: driver [adv7612] using legacy resume method
i2c-core: driver [adv7180] using legacy suspend method
i2c-core: driver [adv7180] using legacy resume method
soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
adv7180 2-0020: chip found @ 0x40 (e6530000.i2c)
[drm] Initialized drm 1.1.0 20060810
rcar-du rcar-du-r8a7791: DU0 use VSPD0
rcar-du rcar-du-r8a7791: DU1 use VSPD1
drm_kms_helper: Error! parse setting(1024x768),laced:0
rcar-du rcar-du-r8a7791: CRTC[1] used by FBDev
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
ata1: link resume succeeded after 1 retries
[drm] Initialized rcar-du 1.0.0 20130110 on minor 0
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel at redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
sh_mobile_sdhi sdhi0: Got CD GPIO #806.
sh_mobile_sdhi sdhi0: Got WP GPIO #807.
ata1: SATA link down (SStatus 0 SControl 300)
sh_mobile_sdhi sdhi0: mmc0 base at 0xee100000 clock rate 195 MHz
sh_mobile_sdhi sdhi2: Got CD GPIO #822.
sh_mobile_sdhi sdhi2: mmc1 base at 0xee160000 clock rate 97 MHz
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
platform sound.6: Driver asoc-simple-card requests probe deferral
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD08G 7.42 GiB 
rcar_sound ec500000.rcar_sound: probed
TCP: cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
 mmcblk0: p1
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
pci-rcar-gen2 pci-rcar-gen2.0: PCI: bus0 revision 11
pci-rcar-gen2 pci-rcar-gen2.0: PCI host bridge to bus 0003:00
pci_bus 0003:00: root bus resource [io  0xee080000-0xee08ffff]
pci_bus 0003:00: root bus resource [mem 0xee080000-0xee08ffff]
pci_bus 0003:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0003:00:00.0: [1033:0000] type 00 class 0x060000
pci 0003:00:00.0: reg 10: [mem 0xee090800-0xee090bff]
pci 0003:00:00.0: reg 14: [mem 0x40000000-0x7fffffff pref]
pci 0003:00:01.0: [1033:0035] type 00 class 0x0c0310
pci 0003:00:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0003:00:01.0: supports D1 D2
pci 0003:00:01.0: PME# supported from D0 D1 D2 D3hot
pci 0003:00:02.0: [1033:00e0] type 00 class 0x0c0320
pci 0003:00:02.0: reg 10: [mem 0x00000000-0x000000ff]
pci 0003:00:02.0: supports D1 D2
pci 0003:00:02.0: PME# supported from D0 D1 D2 D3hot
PCI: bus0: Fast back to back transfers disabled
pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 00
PCI: Device 0003:00:01.0 not available because of resource collisions
pci 0003:00:01.0: Can't enable PCI device, BIOS handoff failed.
PCI: Device 0003:00:01.0 not available because of resource collisions
pci 0003:00:01.0: Driver ohci_hcd requests probe deferral
PCI: Device 0003:00:02.0 not available because of resource collisions
pci 0003:00:02.0: Can't enable PCI device, BIOS handoff failed.
PCI: Device 0003:00:02.0 not available because of resource collisions
pci 0003:00:02.0: Driver ehci-pci requests probe deferral
pci 0003:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff]
pci 0003:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff]
pci-rcar-gen2 pci-rcar-gen2.1: PCI: bus0 revision 11
pci-rcar-gen2 pci-rcar-gen2.1: PCI host bridge to bus 0004:01
pci_bus 0004:01: root bus resource [io  0xee0c0000-0xee0cffff]
pci_bus 0004:01: root bus resource [mem 0xee0c0000-0xee0cffff]
pci_bus 0004:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0004:01:00.0: [1033:0000] type 00 class 0x060000
pci 0004:01:00.0: reg 10: [mem 0xee0d0800-0xee0d0bff]
pci 0004:01:00.0: reg 14: [mem 0x40000000-0x7fffffff pref]
pci 0004:01:01.0: [1033:0035] type 00 class 0x0c0310
pci 0004:01:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0004:01:01.0: supports D1 D2
pci 0004:01:01.0: PME# supported from D0 D1 D2 D3hot
pci 0004:01:02.0: [1033:00e0] type 00 class 0x0c0320
pci 0004:01:02.0: reg 10: [mem 0x00000000-0x000000ff]
pci 0004:01:02.0: supports D1 D2
pci 0004:01:02.0: PME# supported from D0 D1 D2 D3hot
PCI: bus1: Fast back to back transfers disabled
pci_bus 0004:01: busn_res: [bus 01-ff] end is updated to 01
PCI: Device 0004:01:01.0 not available because of resource collisions
pci 0004:01:01.0: Can't enable PCI device, BIOS handoff failed.
PCI: Device 0004:01:01.0 not available because of resource collisions
pci 0004:01:01.0: Driver ohci_hcd requests probe deferral
PCI: Device 0004:01:02.0 not available because of resource collisions
pci 0004:01:02.0: Can't enable PCI device, BIOS handoff failed.
PCI: Device 0004:01:02.0 not available because of resource collisions
pci 0004:01:02.0: Driver ehci-pci requests probe deferral
pci 0004:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
pci 0004:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
asoc-simple-card sound.6:  ak4642-hifi <-> ec500000.rcar_sound mapping ok
PCI: enabling device 0003:00:01.0 (0140 -> 0142)
ohci_hcd 0003:00:01.0: OHCI Host Controller
ohci_hcd 0003:00:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0003:00:01.0: irq 140, io mem 0xee080000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
PCI: enabling device 0003:00:02.0 (0140 -> 0142)
ehci-pci 0003:00:02.0: EHCI Host Controller
ehci-pci 0003:00:02.0: new USB bus registered, assigned bus number 2
ehci-pci 0003:00:02.0: irq 140, io mem 0xee081000
ehci-pci 0003:00:02.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
PCI: enabling device 0004:01:01.0 (0140 -> 0142)
ohci_hcd 0004:01:01.0: OHCI Host Controller
ohci_hcd 0004:01:01.0: new USB bus registered, assigned bus number 3
ohci_hcd 0004:01:01.0: irq 145, io mem 0xee0c0000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
PCI: enabling device 0004:01:02.0 (0140 -> 0142)
ehci-pci 0004:01:02.0: EHCI Host Controller
ehci-pci 0004:01:02.0: new USB bus registered, assigned bus number 4
ehci-pci 0004:01:02.0: irq 145, io mem 0xee0c1000
ehci-pci 0004:01:02.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
/home/ics/GDP-9/renesas/genivi-demo-platform/gdp-src-build/tmp/work-shared/porter/kernel-source/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ALSA device list:
  #0: rsnd-dai.0-ak4642-hifi
kjournald starting.  Commit interval 5 seconds
EXT3-fs (mmcblk0p1): using internal journal
EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) on device 179:1.
devtmpfs: mounted
Freeing unused kernel memory: 232K (c0646000 - c0680000)
usb 4-1: new high-speed USB device number 2 using ehci-pci
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to insert module 'ipv6'
systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture arm.
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
systemd[1]: Set hostname to <porter>.
systemd-sysv-generator[132]: Overwriting existing symlink /run/systemd/generator.late/fuse.service with real service
systemd-sysv-generator[132]: Overwriting existing symlink /run/systemd/generator.late/rc.pvr.service with real service
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Starting Paths.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Created slice System Slice.
usb 4-1.2: new low-speed USB device number 3 using ehci-pci
systemd[1]: Starting System Slice.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting udev Coldplug all Devices...
input: Logitech USB Optical Mouse as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input0
systemd[1]: Mounted Huge Pages File System.
hid-generic 0003:046D:C05A.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0004:01:02.0-1.2/input0
systemd[1]: Mounting Temporary Directory...
systemd[1]: Mounted Debug File System.
systemd[1]: Created slice system-serial\x2dgetty.slice.
usb 4-1.3: new low-speed USB device number 4 using ehci-pci
systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounted FUSE Control File System.
input: HID 04d9:1203 as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input1
hid-generic 0003:04D9:1203.0002: input: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0004:01:02.0-1.3/input0
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
input: HID 04d9:1203 as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.3/4-1.3:1.1/input/input2
hid-generic 0003:04D9:1203.0003: input: USB HID v1.11 Device [HID 04d9:1203] on usb-0004:01:02.0-1.3/input1
systemd[1]: Starting Journal Service...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
systemd-journald[150]: Received request to flush runtime journal from PID 1
adv7180 2-0020: Not detect any video input signal
PVR_K: SGX use system memory.
pvrsrvkm: Power-on latency exceeded, new value 66500 ns
pvrsrvkm pvrsrvkm: start latency exceeded, new value 8500 ns
pvrsrvkm pvrsrvkm: state restore latency exceeded, new value 1300 ns
PVR_K: UM DDK-(3497023) and KM DDK-(3497023) match. [ OK ]
dc_linuxfb: failed to connect to FBDev
dc_linuxfb: failed to connect to FBDev
sh-eth ee700000.ethernet eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI
libphy: ee700000.etherne:01 - Link is Up - 100/Full
-------------- next part --------------
-- Logs begin at Thu 1970-01-01 00:00:06 UTC, end at Thu 2016-03-31 00:03:34 UTC. --
Mar 30 23:53:22 porter systemd[1]: Started Weston reference Wayland compositor.
Mar 30 23:53:22 porter systemd[1]: Starting Weston reference Wayland compositor...
Mar 30 23:53:23 porter weston-launch[247]: pam_lastlog(login:session): file /var/log/lastlog created
Mar 30 23:53:23 porter weston-launch[247]: pam_unix(login:session): session opened for user root by (uid=0)
Mar 30 23:53:25 porter systemd[1]: weston.service: main process exited, code=exited, status=1/FAILURE
Mar 30 23:53:25 porter killall[294]: killall: weston: no process killed
Mar 30 23:53:25 porter systemd[1]: weston.service: control process exited, code=exited status=1
Mar 30 23:53:25 porter systemd[1]: Unit weston.service entered failed state.
Mar 30 23:53:25 porter systemd[1]: weston.service failed.


More information about the genivi-projects mailing list