Running GENIVI for the first time (on RPi3)

Changhyeok Bae changhyeok.bae at gmail.com
Fri Jun 24 04:05:06 EDT 2016


Hi Assaf

Now qt5.5.1 is merged and the keyboard problem in rpi2/3 is resolved.
Please check current master branch in GDP.

Thanks
Changhyeok.

2016-06-24 0:11 GMT+09:00 Assaf Harel <assaf.harel at karambasecurity.com>:

> Ok, great.
> I will follow these links and try to get accustomed to the system.
> Hopefully the qt issue will be resolved quickly, as for now the system is
> not very responsive...
>
> Assaf
>
> On Thu, Jun 23, 2016 at 18:10 Agustin Benito Bethencourt <
> agustin.benito at codethink.co.uk> wrote:
>
>> Hi again,
>>
>> On 23/06/16 16:05, Agustin Benito Bethencourt wrote:
>> > Hi,
>> >
>> > On 23/06/16 15:16, Assaf Harel wrote:
>> >> Hi Jeremiah,
>> >>
>> >> See my answers >>inline
>> >>
>> >> Regards,
>> >> Assaf
>> >> *
>> >> Assaf Harel **- **CTO & Co-Founder*
>> >> *Karamba Security*
>> >>
>> >> Israel: +972 52 720 6732 <tel:%2B972%2052%20473%209064>
>> >> US:+1 734 794 4745 <tel:%2B1%20734%20794%204745>
>> >>
>> >> www.karambasecurity.com <http://www.karambasecurity.com>
>> >>
>> >>> On 22 Jun 2016, at 3:47 PM, Jeremiah Foster
>> >>> <jeremiah.foster at pelagicore.com
>> >>> <mailto:jeremiah.foster at pelagicore.com>> wrote:
>> >>>
>> >>>
>> >>>
>> >>> On Wed, Jun 22, 2016 at 4:49 AM, Assaf Harel
>> >>> <assaf.harel at karambasecurity.com
>> >>> <mailto:assaf.harel at karambasecurity.com>> wrote:
>> >>>
>> >>>     Hi All,
>> >>>
>> >>>
>> >>> Hi Assaf,
>> >>>
>> >>>
>> >>>     I followed the GDP wiki pages about building and installing GENIVI
>> >>>     on raspberry pi (I have RPI3 board).
>> >>>
>> >>>
>> >>> Which image did you build? I'm assuming the GDP (GENIVI Development
>> >>> Platform) but I thought I would sanity check. :-)
>> >>  >>
>> >>  >> Yes, I’ve build GDP 9, based on the instructions on the wiki.
>> >>  >>
>> >>>
>> >>>     Everything loads up pretty well, but afterwards almost nothing
>> >>>     woks for me.
>> >>>
>> >>>
>> >>>     I’m connected through HDMI to a screen, and have usb wireless
>> >>>     keyboard and mouse.
>> >>>     After boot up, I see the Genivi UI, and can click with the mouse,
>> >>>     but I don’t see anything happening, and one of the apps do start
>> >>>     (navigation for instance), I don’t know how to return back.
>> >>>
>> >>>
>> >>> This sounds like a known bug. Can you see if your logs are providing
>> >>> any info?
>> >>  >>
>> >>  >> Right, known bug. Waiting anxiously for its solution…
>> >>  >>
>> >>>
>> >>>     Also, is there some setting page, where I can configure the wifi
>> >>>     settings?
>> >>>
>> >>>
>> >>> Wifi settings should be done via Connman configuration if I'm not
>> >>> mistaken.
>> >>  >>
>> >>  >> Based on this, I’ve found Connmand running, but haven’t found its
>> >> configuration file, so the board is still not connected.
>> >>  >> More assistance would be greatly appreciated…
>> >>  >>
>> >>>
>> >>>     I suspect that when the board will be connected, anything will
>> >>>     work smoother.
>> >>>
>> >>>
>> >>> You mean connected to the network?
>> >>  >>
>> >>  >> Yes
>> >>  >>
>> >>>
>> >>>
>> >>>     Also, If there’s some how-to-use GENIVI document you can direct me
>> >>>     to, I’ll gladly read it.
>> >>>
>> >>>
>> >>> There is this page:
>> >>>
>> https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567210#GENIVIDevelopmentPlatform(GDP)-HowdoIusetheGENIVIDevelopmentPlatform
>> ?
>> >>>
>> >>> But that really covers usage from a developer perspective, not from an
>> >>> end user perspective. This page has an overview:
>> >>>
>> https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567879
>> >>>
>> >>> but it has a limited number of how-tos.
>> >>>
>> >>> It would be great to hear from you what type of documentation you're
>> >>> looking for -- obviously something that helps to configure the wifi
>> >>> once you've installed, but perhaps there is other specific information
>> >>> you'd like to get started?
>> >>  >>
>> >>  >> Try to look at it from the eyes of a newbie. I’m familiar with open
>> >> source, GIT, toolchains, HW configuration, etc.
>> >>  >> What I’m not familiar with is the GENIVI system (as always when
>> >> you’re new to an open source system).
>> >>  >> So tell me what you’re trying to do, and how do you do it, and walk
>> >> me through the first 2 hours of work.
>> >>  >> What should I do, what do I see, how do I configure, how do I make
>> >> it work, etc.
>> >>  >> The GDP9 wiki instruct me on how to build and burn on flash, but
>> >> after the board init, I have no idea with to do with it...
>> >
>> > Assaf, you are absolutely right.
>> >
>> > GENIVI still have a lot to do in order to provide an "easy to use"
>> > platform. Providing a software that boots in several boards is only the
>> > starting point. That is where we are. We have improved, but is not
>> enough.
>> >
>> > Currently, you get to GDP through its landing (home page[1]( or download
>> > page[2]. You navigate through the feature page[3] to discover what is
>> > about the latest version and then you arrive to the target page[4] to
>> > make GDP boot in your board. If you are lucky and it boots, you go to
>> > GDP In Detail[5] to start learning what is inside this new system but
>> > from that point there is a huge gap.
>> >
>> > GENIVI is divided in groups. We still lack a sense of "product" when it
>> > comes to GDP. As usual, the documentation is just the reflection of a
>> > deeper problem.
>> >
>> > The good news is that we are aware of the problem and that we can
>> > improve it without an outstanding effort in two ways:
>> >
>> > 1.- Reinforcing the above path to ensure that newcomers do not get lost
>> > and arrive to GDP in Detail page.
>> > 2.- Making sure that, from that page, a user arrives to the meaningful
>> > information we already have about the different GENIVI components.
>> >
>> > That way we can detect the current gaps in documentation and fill them.
>> >
>> > We can and should improve the situation in the next release. Meanwhile,
>> > we are putting effort in providing a good support, that partly mitigates
>> > the gaps.
>>
>> I pressed the Send Now button....
>>
>> [1] http://projects.genivi.org/gdp
>> [2] http://projects.genivi.org/gdp/download
>> [3] http://projects.genivi.org/gdp9
>> [4]
>>
>> https://at.projects.genivi.org/wiki/display/GDP/GDP+target+boards%2C+virtualization+and+peripherals
>> [5]
>> https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567879
>>
>>  From the links you can easily see another of those issues we are
>> working on currently and that is in its way to be fixed in the next
>> release, the URLs.
>>
>>
>> >
>> >>  >>
>> >>>
>> >>> Regards,
>> >>>
>> >>> Jeremiah
>> >>>
>> >>>     Thanks,
>> >>>     Assaf
>> >>>     _______________________________________________
>> >>>     genivi-projects mailing list
>> >>>     genivi-projects at lists.genivi.org
>> >>>     <mailto:genivi-projects at lists.genivi.org>
>> >>>     https://lists.genivi.org/mailman/listinfo/genivi-projects
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Jeremiah C. Foster
>> >>> GENIVI COMMUNITY MANAGER
>> >>>
>> >>> Pelagicore AB
>> >>> Ekelundsgatan 4, 6tr, SE-411 18
>> >>> Gothenburg, Sweden
>> >>> M: +46 (0)73 093 0506 <tel:%2B46%20%280%2973%20093%200506>
>> >>> jeremiah.foster at pelagicore.com <mailto:jeremiah.foster at pelagicore.com
>> >
>> >>>
>> >>> <PELAGICORE_RGB_Black_horizontal.png>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> genivi-projects mailing list
>> >> genivi-projects at lists.genivi.org
>> >> https://lists.genivi.org/mailman/listinfo/genivi-projects
>> >>
>> >
>>
>> --
>> Agustin Benito Bethencourt
>> Principal Consultant - FOSS at Codethink
>> agustin.benito at codethink.co.uk
>>
> --
> Assaf Harel - CTO & Co-Founder
> Karamba Security
>
> Israel: +972 52 720 6732
> US:    +1 734 794 4745
>
> 2723 South State Street
> Ann Arbor, MI, 48104
>
> www.karambasecurity.com
>
> _______________________________________________
> genivi-projects mailing list
> genivi-projects at lists.genivi.org
> https://lists.genivi.org/mailman/listinfo/genivi-projects
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genivi.org/pipermail/genivi-projects_lists.genivi.org/attachments/20160624/d3ff1e24/attachment.html>


More information about the genivi-projects mailing list