Running GENIVI for the first time (on RPi3)

Assaf Harel assaf.harel at karambasecurity.com
Thu Jun 23 10:16:25 EDT 2016


Hi Jeremiah,

See my answers >>inline

Regards,
Assaf


Assaf Harel - CTO & Co-Founder
Karamba Security

Israel: +972 52 720 6732 <tel:%2B972%2052%20473%209064>
US:     +1 734 794 4745 <tel:%2B1%20734%20794%204745>

www.karambasecurity.com <http://www.karambasecurity.com/>
> On 22 Jun 2016, at 3:47 PM, Jeremiah Foster <jeremiah.foster at pelagicore.com> wrote:
> 
> 
> 
> On Wed, Jun 22, 2016 at 4:49 AM, Assaf Harel <assaf.harel at karambasecurity.com <mailto:assaf.harel at karambasecurity.com>> wrote:
> Hi All,
> 
> Hi Assaf, 
> 
> I followed the GDP wiki pages about building and installing GENIVI on raspberry pi (I have RPI3 board).
> 
> Which image did you build? I'm assuming the GDP (GENIVI Development Platform) but I thought I would sanity check. :-) 
>>
>> Yes, I’ve build GDP 9, based on the instructions on the wiki.
>>
>  
> Everything loads up pretty well, but afterwards almost nothing woks for me. 
> 
> I’m connected through HDMI to a screen, and have usb wireless keyboard and mouse.
> After boot up, I see the Genivi UI, and can click with the mouse, but I don’t see anything happening, and one of the apps do start (navigation for instance), I don’t know how to return back.
> 
> This sounds like a known bug. Can you see if your logs are providing any info?
>>
>> Right, known bug. Waiting anxiously for its solution…
>>
>  
> Also, is there some setting page, where I can configure the wifi settings?
> 
> Wifi settings should be done via Connman configuration if I'm not mistaken.
>>
>> Based on this, I’ve found Connmand running, but haven’t found its configuration file, so the board is still not connected.
>> More assistance would be greatly appreciated…
>>
>  
> I suspect that when the board will be connected, anything will work smoother.
> 
> You mean connected to the network? 
>>
>> Yes
>>
> 
> Also, If there’s some how-to-use GENIVI document you can direct me to, I’ll gladly read it.
> 
> There is this page: https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567210#GENIVIDevelopmentPlatform(GDP)-HowdoIusetheGENIVIDevelopmentPlatform <https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567210#GENIVIDevelopmentPlatform(GDP)-HowdoIusetheGENIVIDevelopmentPlatform>? But that really covers usage from a developer perspective, not from an end user perspective. This page has an overview: https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567879 <https://at.projects.genivi.org/wiki/pages/viewpage.action?pageId=11567879> but it has a limited number of how-tos. 
> 
> It would be great to hear from you what type of documentation you're looking for -- obviously something that helps to configure the wifi once you've installed, but perhaps there is other specific information you'd like to get started?
>>
>> Try to look at it from the eyes of a newbie. I’m familiar with open source, GIT, toolchains, HW configuration, etc.
>> What I’m not familiar with is the GENIVI system (as always when you’re new to an open source system).
>> So tell me what you’re trying to do, and how do you do it, and walk me through the first 2 hours of work.
>> What should I do, what do I see, how do I configure, how do I make it work, etc.
>> The GDP9 wiki instruct me on how to build and burn on flash, but after the board init, I have no idea with to do with it... 
>>
> 
> Regards,
> 
> Jeremiah
>  
> Thanks,
> Assaf
> _______________________________________________
> genivi-projects mailing list
> genivi-projects at lists.genivi.org <mailto:genivi-projects at lists.genivi.org>
> https://lists.genivi.org/mailman/listinfo/genivi-projects <https://lists.genivi.org/mailman/listinfo/genivi-projects>
> 
> 
> 
> -- 
> Jeremiah C. Foster
> GENIVI COMMUNITY MANAGER
> 
> Pelagicore AB
> Ekelundsgatan 4, 6tr, SE-411 18 
> Gothenburg, Sweden
> M: +46 (0)73 093 0506 <tel:%2B46%20%280%2973%20093%200506>
> jeremiah.foster at pelagicore.com <mailto:jeremiah.foster at pelagicore.com>
> 
> <PELAGICORE_RGB_Black_horizontal.png>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.genivi.org/pipermail/genivi-projects_lists.genivi.org/attachments/20160623/3f19aafd/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: unknown.png
Type: image/png
Size: 6222 bytes
Desc: not available
URL: <http://lists.genivi.org/pipermail/genivi-projects_lists.genivi.org/attachments/20160623/3f19aafd/attachment.png>


More information about the genivi-projects mailing list