Github access issues

Stephen Lawrence stephen.lawrence at renesas.com
Wed Jun 15 11:38:27 EDT 2016


Ignore the additional error I showed in the log:
>>>>fatal: reference is not a tree: 
>>>>92ad2729b5a837cf26b1d2b0ce373c73801f1250

That's just noise on my part.

Regards

Steve

> -----Original Message-----
> From: Stephen Lawrence
> Sent: 15 June 2016 16:33
> To: genivi-projects at lists.genivi.org
> Subject: Github access issues
> 
> Hi,
> 
> I've been suffering some github access issues this afternoon. Specifically
> when running GDP init.sh the git submodule clones are timing out. See end
> of email for the output. If I immediately go and do this manually it succeeds.
> Receiving objects during the clone comes really fast, then slows dramatically.
> 
> I had thought it might be a local network problem but it was mentioned in
> the GDP call today that somebody else had reported in the wiki similar issues.
> So I'm reporting it here for information in case it becomes a trend. Hopefully
> not.
> 
> As an aside I've also seen some instances of github links resulting in 404's.
> 
> Regards
> 
> Steve
> 
> -- Failure 1 --
> source init.sh porter
> You selected target porter
> porter is a valid target
> Generating bitbake configuration files for porter Local & bblayers conf set for
> porter Submodule 'meta-erlang' (git://github.com/joaohf/meta-erlang.git)
> registered for path 'meta-erlang'
> Submodule 'meta-genivi-dev' (http://github.com/genivi/meta-genivi-
> dev.git) registered for path 'meta-genivi-dev'
> Submodule 'meta-intel' (git://git.yoctoproject.org/meta-intel) registered for
> path 'meta-intel'
> Submodule 'meta-ivi' (http://git.yoctoproject.org/git/meta-ivi) registered for
> path 'meta-ivi'
> Submodule 'meta-oic' (http://git.yoctoproject.org/git/meta-oic.git)
> registered for path 'meta-oic'
> Submodule 'meta-openembedded' (git://git.openembedded.org/meta-
> openembedded) registered for path 'meta-openembedded'
> Submodule 'meta-qt5' (git://github.com/meta-qt5/meta-qt5.git) registered
> for path 'meta-qt5'
> Submodule 'meta-raspberrypi' (git://git.yoctoproject.org/meta-raspberrypi)
> registered for path 'meta-raspberrypi'
> Submodule 'meta-renesas' (git://github.com/slawr/meta-renesas.git)
> registered for path 'meta-renesas'
> Submodule 'meta-rust' (git://github.com/jmesmon/meta-rust.git) registered
> for path 'meta-rust'
> Submodule 'meta-rvi' (git://github.com/GENIVI/meta-rvi.git) registered for
> path 'meta-rvi'
> Submodule 'poky' (git://git.yoctoproject.org/poky) registered for path 'poky'
> Synchronising submodule url for 'meta-erlang'
> Synchronising submodule url for 'meta-genivi-dev'
> Synchronising submodule url for 'meta-intel'
> Synchronising submodule url for 'meta-ivi'
> Synchronising submodule url for 'meta-oic'
> Synchronising submodule url for 'meta-openembedded'
> Synchronising submodule url for 'meta-qt5'
> Synchronising submodule url for 'meta-raspberrypi'
> Synchronising submodule url for 'meta-renesas'
> Synchronising submodule url for 'meta-rust'
> Synchronising submodule url for 'meta-rvi'
> Synchronising submodule url for 'poky'
> Cloning into 'meta-erlang'...
> >>>>fatal: unable to connect to github.com:
> github.com[0: 192.30.252.123]: errno=Connection timed out
> 
> Clone of 'git://github.com/joaohf/meta-erlang.git' into submodule path
> 'meta-erlang' failed
> bash: poky/oe-init-build-env: No such file or directory
> -- Failure 2 --
> source init.sh porter
> You selected target porter
> porter is a valid target
> Generating bitbake configuration files for porter Local & bblayers conf set for
> porter Synchronising submodule url for 'meta-erlang'
> Synchronising submodule url for 'meta-genivi-dev'
> Synchronising submodule url for 'meta-ivi'
> Synchronising submodule url for 'meta-oic'
> Synchronising submodule url for 'meta-openembedded'
> Synchronising submodule url for 'meta-qt5'
> Synchronising submodule url for 'meta-renesas'
> Synchronising submodule url for 'meta-rust'
> Synchronising submodule url for 'meta-rvi'
> Synchronising submodule url for 'poky'
> Cloning into 'meta-erlang'...
> remote: Counting objects: 398, done.
> remote: Total 398 (delta 0), reused 0 (delta 0), pack-reused 398 Receiving
> objects: 100% (398/398), 83.25 KiB | 0 bytes/s, done.
> Resolving deltas: 100% (176/176), done.
> Checking connectivity... done.
> Submodule path 'meta-erlang': checked out
> '4d7eacc8e6593934ed5b0c8abc3d3e9dc339d849'
> Cloning into 'meta-genivi-dev'...
> remote: Counting objects: 1172, done.
> remote: Total 1172 (delta 0), reused 0 (delta 0), pack-reused 1172 Receiving
> objects: 100% (1172/1172), 15.43 MiB | 313.00 KiB/s, done.
> Resolving deltas: 100% (513/513), done.
> Checking connectivity... done.
> >>>>fatal: reference is not a tree:
> >>>>92ad2729b5a837cf26b1d2b0ce373c73801f1250
> Cloning into 'meta-ivi'...
> remote: Counting objects: 7495, done.
> remote: Compressing objects: 100% (2999/2999), done.
> remote: Total 7495 (delta 4206), reused 7429 (delta 4142) Receiving objects:
> 100% (7495/7495), 18.33 MiB | 181.00 KiB/s, done.
> Resolving deltas: 100% (4206/4206), done.
> Checking connectivity... done.
> Submodule path 'meta-ivi': checked out
> '9d72380c1d50d0c3469b85c3a43fe612b5ee1dd9'
> Cloning into 'meta-oic'...
> remote: Counting objects: 152, done.
> remote: Compressing objects: 100% (115/115), done.
> remote: Total 152 (delta 51), reused 106 (delta 5) Receiving objects: 100%
> (152/152), 64.19 KiB | 0 bytes/s, done.
> Resolving deltas: 100% (51/51), done.
> Checking connectivity... done.
> Submodule path 'meta-oic': checked out
> '69146eaf8bc05c74c377e731b7e16d82854a4659'
> Cloning into 'meta-openembedded'...
> remote: Counting objects: 61875, done.
> remote: Compressing objects: 100% (21290/21290), done.
> remote: Total 61875 (delta 37680), reused 61772 (delta 37597) Receiving
> objects: 100% (61875/61875), 23.82 MiB | 54.00 KiB/s, done.
> Resolving deltas: 100% (37680/37680), done.
> Checking connectivity... done.
> Submodule path 'meta-openembedded': checked out
> 'ad6133a2e95f4b83b6b3ea413598e2cd5fb3fd90'
> Cloning into 'meta-qt5'...
> >>>fatal: unable to connect to github.com:
> github.com[0: 192.30.252.121]: errno=Connection timed out
> 
> Clone of 'git://github.com/meta-qt5/meta-qt5.git' into submodule path
> 'meta-qt5' failed
> bash: poky/oe-init-build-env: No such file or directory
> 
> Now run:  bitbake genivi-dev-platform
> 
> manual fetch then succeeds:
> git submodule update meta-qt5
> Cloning into 'meta-qt5'...
> remote: Counting objects: 6697, done.
> remote: Compressing objects: 100% (20/20), done.
> remote: Total 6697 (delta 8), reused 0 (delta 0), pack-reused 6677 Receiving
> objects: 100% (6697/6697), 1.87 MiB | 54.00 KiB/s, done.
> Resolving deltas: 100% (4135/4135), done.
> Checking connectivity... done.
> Submodule path 'meta-qt5': checked out
> '90919b9d86988e7da01fa2c0a07246b5b5600a5d'



More information about the genivi-projects mailing list