GDP/meta-ivi rocko wayland-ivi-extension 2.0 integration issues

Andreasson, Oscar (Pelagicore) oscar.andreasson at pelagicore.com
Wed Jan 31 03:14:45 EST 2018


Hi Friedrich,

Apologies for the delayed response, I picked up some flu last week. The baseline work on meta-ivi
bump to rocko is performed here:

https://github.com/frznlogic/meta-ivi/tree/bump-rocko

I generally avoid working directly in the upstream repositories to avoid making any mistakes :)


On Wed, 2018-01-24 at 15:02 +0000, Friedrich, Eugen (ADITG/ESB) wrote:
> Ho Oscar,
> 
> Could you please point me to the repository and the branch where the weston update to base line
> will be available?
> 
> Is it somewhere here: https://github.com/GENIVI/meta-ivi?
> 
> 
> Best regards
> 
> Eugen Friedrich
> Engineering Software Base (ADITG/ESB)
> 
> Tel. +49 5121 49 6921
> 
> > -----Original Message-----
> > From: Andreasson, Oscar (Pelagicore)
> > [mailto:oscar.andreasson at pelagicore.com]
> > Sent: Freitag, 19. Januar 2018 16:59
> > To: stephen.lawrence at renesas.com; Friedrich, Eugen (ADITG/ESB); Ucan, Emre
> > (ADITG/ESB)
> > Cc: genivi-dev at lists.genivi.org; genivi-ivi-layer-management at lists.genivi.org
> > Subject: Re: GDP/meta-ivi rocko wayland-ivi-extension 2.0 integration issues
> > 
> > Hi,
> > 
> > On Fri, 2018-01-19 at 13:31 +0000, Stephen Lawrence wrote:
> > [SNIP]
> > > > 	   For the Baseline I would take the wayland-ivi-extension 2.1 and
> > > > for weston there are two options:
> > > > 	   1)  weston 2.0.0 plus
> > > > https://cgit.freedesktop.org/wayland/weston/commit/?h=3.0&id=deee858
> > > > 		This version is included in yocto already so minimum risk, only
> > > > additional patch is not optimal, and it will be not the referenced
> > > > version in the compliance proposal (maybe not that important)
> > > > 	   2)  weston 3.0.0 clean
> > > > 		This is not in the yocto so potential risk is higher, from the
> > > > feature set point of view:
> > > > https://lists.freedesktop.org/archives/wayland-
> > > > devel/2017-August/034749.html (not much)
> > > > 	Internally in ADIT we are not switched to 3.0.0 We just have done
> > > > some short checks on Broxton and Renesas, those where fine.
> > > 
> > > Disclosure: with my Renesas hat on I would prefer Weston 2.0 + patch.
> > > Although a patch is not great, Weston 2.0 is the version used in YP
> > > 2.4 (rocko) Poky Meta and is the version we have tested and developed
> > > against in recent months ahead of an upcoming YP 2.4 based Yocto BSP
> > > release. We choose Weston
> > > 2.0 in part because that was the guidance we received from the
> > > Compositor
> > > (ivi-extension) maintainers. Of course it is also the version you guys
> > > developed and tested with.
> > 
> > Fair enough, I agree with the reasoning and to not block the issue anymore let's
> > go to Weston 2.0 + patch. I will fix that in my patchset on monday ;).
> > 
> > [SNIP]
> > 
> > --
> > Oscar Andreasson
> > Lead Software Engineer
> > 
> > Pelagicore AB
> > Östrahamngatan 16, Gothenburg, Sweden
> > +46 (0)761337765
> > oscar.andreasson at pelagicore.com
> > www.pelagicore.com
> > 
> > PELAGICORE a part of LUXOFT
> > 
> > Registered Office Gothenburg, Sweden
> > Registration No. 556780-4199
-- 
-- 
Oscar Andreasson
Lead Software Engineer

Pelagicore AB
Östrahamngatan 16, Gothenburg, Sweden
+46 (0)761337765
oscar.andreasson at pelagicore.com
www.pelagicore.com

PELAGICORE a part of LUXOFT

Registered Office Gothenburg, Sweden
Registration No. 556780-4199


More information about the genivi-ivi-layer-management mailing list