[genivi-dlt] Switch off Log and File transfer

Manikandan Chockalingam (RBEI/ECF3) Manikandan.Chockalingam at in.bosch.com
Fri Aug 4 04:23:06 EDT 2017


Hello Prathap,

The option what we have explained is not for display side alone. The configured log level in dlt-viewer will be sent to dlt-daemon running in target and it will be sent to the dlt user library as well. So the logs will be filtered out at the user application level itself.

The option you have mentioned by changing the ContextLogLevel in dlt.conf is like a static configuration and whenever you change it, you need to restart dlt-daemon. But the option we have explained is dynamic log level change and you don’t need to restart the dlt-daemon.

But if you want to trigger this log level change through another application, then you can use dlt-control but you should uncheck “send default log level ” option and “auto reconnect timeout” in dlt-viewer as Christoph mentioned[since this will override the log level you are configuring through dlt-control].

Best regards,

manikandan chockalingam

Tel. 080 6617 4452

From: Prathap Chandran [mailto:prathapachandran at acsiatech.com]
Sent: Thursday, August 03, 2017 7:41 PM
To: Lipka Christoph (ADITG/SWG) <CLipka at de.adit-jv.com>
Cc: Manikandan Chockalingam (RBEI/ECF3) <Manikandan.Chockalingam at in.bosch.com>; genivi-diagnostic-log-and-trace at lists.genivi.org
Subject: Re: [genivi-dlt] Switch off Log and File transfer

Hi Christoph & Mani,
The issue was due to the improper settings of property ContextLogLevel in the dlt.config and its value was 4 by default. Now when I start dlt-control application, always the log level was set to 4 on registration of new context by dlt-control. So the log will transfer always. Now I set this property ContextLogLevel to 0 (OFF) and restarted dlt-daemon and the problem is resolved.

It is the first time that I am using this component. Thank you very much for your timely help.
Thanks & regards
Prathap

On Wed, Aug 2, 2017 at 8:17 PM, Lipka, Christoph (ADITG/ESA) <clipka at de.adit-jv.com<mailto:clipka at de.adit-jv.com>> wrote:
Hi Prathap,

What Mani and me wanted to explain is that the DLT Viewer by default sends log level updates (default: INFO). You have to configure the DLT Viewer to not send these updates. It’s likely that the DLT Viewer overrides the configuration you made using the dlt-control application.

Regards,
Christoph

Von: Prathap Chandran [mailto:prathapachandran at acsiatech.com<mailto:prathapachandran at acsiatech.com>]
Gesendet: Mittwoch, 2. August 2017 16:00
An: Manikandan Chockalingam (RBEI/ECF3)
Cc: Lipka, Christoph (ADITG/ESA); genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
Betreff: Re: [genivi-dlt] Switch off Log and File transfer

Thank you very much for the reply.

But the option that you are explaining is just in the display side. I want to switch off the logs in the dlt-daemon itself so that when I install the daemon in an android device installed in a vehicle, I need to control it's on/off behavior using another Android application. When I off the log, the daemon needs to stop log transfer.
Regards
Prathap


On Wed, Aug 2, 2017 at 2:23 PM, Manikandan Chockalingam (RBEI/ECF3) <Manikandan.Chockalingam at in.bosch.com<mailto:Manikandan.Chockalingam at in.bosch.com>> wrote:
Hi Prathap,

If you are using dlt-viewer, then you can use edit ECU option and set the default log level as "off" which will turn off the logs of all contexts which uses default log level.

Best regards,
Manikandan Chockalingam


-----Original Message-----
From: genivi-diagnostic-log-and-trace [mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org>] On Behalf Of Lipka, Christoph (ADITG/ESA)
Sent: Wednesday, August 02, 2017 12:03 PM
To: Prathap Chandran <prathapachandran at acsiatech.com<mailto:prathapachandran at acsiatech.com>>; genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
Subject: Re: [genivi-dlt] Switch off Log and File transfer

Hi Prathap,

When using dlt-control, are you running DLT Viewer as well? If so, make sure you unchecked "Send Default Log Level ..." in the "ECU" tab and "auto-reconnect" in the "IP" tab of the ECU Configuration dialog.

Best regards

Christoph Lipka
Engineering System & Architecture (ADITG/ESA)

Tel. +49 5121 49 6945


-----Ursprüngliche Nachricht-----
Von: genivi-diagnostic-log-and-trace [mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org>] Im Auftrag von Prathap Chandran
Gesendet: Mittwoch, 2. August 2017 08:24
An: genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
Betreff: [genivi-dlt] Switch off Log and File transfer

Hi All,

I am actually doing a feasibility of using dlt-daemon for my project. I have compiled and run the project successfully and log transfer is working fine and now the logs and transferred files can view using dlt-viewer.

One of the main requirement of my project is to completely switch off the log transfer and file transfer behaviour via dlt-daemon using some control signals. When I search for it, found only one option for it using the dlt-control SW component of DLT.

dlt-control -l 0 -a LOG -c TEST 192.168.3.38

But even after the above operation, when sending messages using the example tool dlt-example-user, the logs are still transferring.

So could you please suggest a solution for completely switch off the logs and file transfer without stopping dlt-daemon?

Thanks & regards
Prathap
_______________________________________________
genivi-diagnostic-log-and-trace mailing list genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
https://lists.genivi.org/mailman/listinfo/genivi-diagnostic-log-and-trace
_______________________________________________
genivi-diagnostic-log-and-trace mailing list
genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
https://lists.genivi.org/mailman/listinfo/genivi-diagnostic-log-and-trace




More information about the genivi-diagnostic-log-and-trace mailing list