[genivi-dlt] Switch off Log and File transfer

Lipka, Christoph (ADITG/ESA) clipka at de.adit-jv.com
Wed Aug 2 10:47:38 EDT 2017


Hi Prathap,

What Mani and me wanted to explain is that the DLT Viewer by default sends log level updates (default: INFO). You have to configure the DLT Viewer to not send these updates. It’s likely that the DLT Viewer overrides the configuration you made using the dlt-control application.

Regards,
Christoph

Von: Prathap Chandran [mailto:prathapachandran at acsiatech.com]
Gesendet: Mittwoch, 2. August 2017 16:00
An: Manikandan Chockalingam (RBEI/ECF3)
Cc: Lipka, Christoph (ADITG/ESA); genivi-diagnostic-log-and-trace at lists.genivi.org
Betreff: Re: [genivi-dlt] Switch off Log and File transfer

Thank you very much for the reply.

But the option that you are explaining is just in the display side. I want to switch off the logs in the dlt-daemon itself so that when I install the daemon in an android device installed in a vehicle, I need to control it's on/off behavior using another Android application. When I off the log, the daemon needs to stop log transfer.
Regards
Prathap


On Wed, Aug 2, 2017 at 2:23 PM, Manikandan Chockalingam (RBEI/ECF3) <Manikandan.Chockalingam at in.bosch.com<mailto:Manikandan.Chockalingam at in.bosch.com>> wrote:
Hi Prathap,

If you are using dlt-viewer, then you can use edit ECU option and set the default log level as "off" which will turn off the logs of all contexts which uses default log level.

Best regards,
Manikandan Chockalingam


-----Original Message-----
From: genivi-diagnostic-log-and-trace [mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org>] On Behalf Of Lipka, Christoph (ADITG/ESA)
Sent: Wednesday, August 02, 2017 12:03 PM
To: Prathap Chandran <prathapachandran at acsiatech.com<mailto:prathapachandran at acsiatech.com>>; genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
Subject: Re: [genivi-dlt] Switch off Log and File transfer

Hi Prathap,

When using dlt-control, are you running DLT Viewer as well? If so, make sure you unchecked "Send Default Log Level ..." in the "ECU" tab and "auto-reconnect" in the "IP" tab of the ECU Configuration dialog.

Best regards

Christoph Lipka
Engineering System & Architecture (ADITG/ESA)

Tel. +49 5121 49 6945


-----Ursprüngliche Nachricht-----
Von: genivi-diagnostic-log-and-trace [mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org>] Im Auftrag von Prathap Chandran
Gesendet: Mittwoch, 2. August 2017 08:24
An: genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
Betreff: [genivi-dlt] Switch off Log and File transfer

Hi All,

I am actually doing a feasibility of using dlt-daemon for my project. I have compiled and run the project successfully and log transfer is working fine and now the logs and transferred files can view using dlt-viewer.

One of the main requirement of my project is to completely switch off the log transfer and file transfer behaviour via dlt-daemon using some control signals. When I search for it, found only one option for it using the dlt-control SW component of DLT.

dlt-control -l 0 -a LOG -c TEST 192.168.3.38

But even after the above operation, when sending messages using the example tool dlt-example-user, the logs are still transferring.

So could you please suggest a solution for completely switch off the logs and file transfer without stopping dlt-daemon?

Thanks & regards
Prathap
_______________________________________________
genivi-diagnostic-log-and-trace mailing list genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
https://lists.genivi.org/mailman/listinfo/genivi-diagnostic-log-and-trace
_______________________________________________
genivi-diagnostic-log-and-trace mailing list
genivi-diagnostic-log-and-trace at lists.genivi.org<mailto:genivi-diagnostic-log-and-trace at lists.genivi.org>
https://lists.genivi.org/mailman/listinfo/genivi-diagnostic-log-and-trace



More information about the genivi-diagnostic-log-and-trace mailing list