[genivi-dlt] Switch off Log and File transfer

Manikandan Chockalingam (RBEI/ECF3) Manikandan.Chockalingam at in.bosch.com
Wed Aug 2 04:53:23 EDT 2017


Hi Prathap,

If you are using dlt-viewer, then you can use edit ECU option and set the default log level as "off" which will turn off the logs of all contexts which uses default log level.

Best regards,
Manikandan Chockalingam  


-----Original Message-----
From: genivi-diagnostic-log-and-trace [mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org] On Behalf Of Lipka, Christoph (ADITG/ESA)
Sent: Wednesday, August 02, 2017 12:03 PM
To: Prathap Chandran <prathapachandran at acsiatech.com>; genivi-diagnostic-log-and-trace at lists.genivi.org
Subject: Re: [genivi-dlt] Switch off Log and File transfer

Hi Prathap,

When using dlt-control, are you running DLT Viewer as well? If so, make sure you unchecked "Send Default Log Level ..." in the "ECU" tab and "auto-reconnect" in the "IP" tab of the ECU Configuration dialog.

Best regards

Christoph Lipka
Engineering System & Architecture (ADITG/ESA)

Tel. +49 5121 49 6945


-----Ursprüngliche Nachricht-----
Von: genivi-diagnostic-log-and-trace [mailto:genivi-diagnostic-log-and-trace-bounces at lists.genivi.org] Im Auftrag von Prathap Chandran
Gesendet: Mittwoch, 2. August 2017 08:24
An: genivi-diagnostic-log-and-trace at lists.genivi.org
Betreff: [genivi-dlt] Switch off Log and File transfer

Hi All,

I am actually doing a feasibility of using dlt-daemon for my project. I have compiled and run the project successfully and log transfer is working fine and now the logs and transferred files can view using dlt-viewer.

One of the main requirement of my project is to completely switch off the log transfer and file transfer behaviour via dlt-daemon using some control signals. When I search for it, found only one option for it using the dlt-control SW component of DLT.

dlt-control -l 0 -a LOG -c TEST 192.168.3.38

But even after the above operation, when sending messages using the example tool dlt-example-user, the logs are still transferring.

So could you please suggest a solution for completely switch off the logs and file transfer without stopping dlt-daemon?

Thanks & regards
Prathap
_______________________________________________
genivi-diagnostic-log-and-trace mailing list genivi-diagnostic-log-and-trace at lists.genivi.org
https://lists.genivi.org/mailman/listinfo/genivi-diagnostic-log-and-trace
_______________________________________________
genivi-diagnostic-log-and-trace mailing list
genivi-diagnostic-log-and-trace at lists.genivi.org
https://lists.genivi.org/mailman/listinfo/genivi-diagnostic-log-and-trace


More information about the genivi-diagnostic-log-and-trace mailing list